Graphic LCD Command Sheet HTML Version

Yet again I was looking for the GLCD command sheet in the internet and failed to find any good resolution images that I can use for post references. Even the data sheet looks really bad. So here I am with a HTML Version of the GLCD command sheet just like the one for the character LCD I posted a while back.

GLCD Command Sheet

Instruction
Code
Description
RS
RW
D7
D6
D5
D4
D3
D2
D1
D0
Display On/OFF 0 0 0 1 1 1 1 1 * Controls the Display ON or OFF. Internal status and display RAM data is not affected.
Set Address A A A A A (Y Address) A 0 1 A A X Address ( 0 to 63 ) Sets the Y address in the Y address counter.
Set Page Address A (X Address) 1 1 1 1 Page (0-7) Sets the X address in the X address counter.
Display Start Line A (Z Address) 1 1 Display Start Line (0-63) Indicates the display data RAM displayed at the top of the screen.
Status Read 1 BF On/Off Rst Status Read
Write Display Data 1 A A A A A A A A Write Data Write data DB0 to DB7 into display data RAM. After writing instruction Y address is incremented by 1
Read Display Data 1 A 1 A A A A A A A A Read Data Reads data DB0 to DB7 from the display data RAM to the data bus.
Instruction bit names:</p>
  • BFA - 0 = can accept instruction, 1 = internal operation in progress.
  • RstA - 0 = Normal operation, 1 = Reset.
  • ON/OFF -A 0 = Display ON, 1 = Display OFF.